The ARROYO: for GH Aeroflo2, Botanicare Econojet, DWC and similar systems

Sure To Grow products are designed to benefit growers and users by using a unique substrate and a technology designed for the 21st century. Sure To Grow is lighter, cleaner, and much less bulky than any other medium currently on the market. You will find that with Sure To Grow, less is truly more.

A revolutionary way to grow your crops in net pots and buckets! The new STG inserts are easy to use, and with no need to condition or pre-clean, they are ready to use right out of the box. Sized to fit most net pots and buckets, and are compatible with all major growing systems and methods such as: Flood and Drain, Aeroponics, Top drip, DWC, Raft and Fogponics.

Recommended for long-term crops such as tomatoes and cucumbers or plants with a large root mass.

• Available in 10 sizes ranging from a 2" cloner to a 2 gallon bucket
• Superior in performance to preexisting media alternatives

Learn more about STG by watching their instructional videos at http://www.suretogrow.com/video/

Carbon dioxide generators operate by burning carbonaceous fuels such as propane or natural gas. The burners used in Green Air Products CO2 generators are specially designed to maximize the production of CO2 and minimize heat as a by-product. Green Air Products generators provide CO2 far more economically than any other means of enrichment. Carbon dioxide enrichment equipment and methods have improved as experience and the understanding of atmospheric control and plant physiology have advanced. Plant metabolism and growth rate are dependent on the available atmospheric CO2. Plants are keenly sensitive to CO2 variations; optimum values must be constant and precisely controlled. The method, timing, and size of equipment must be properly determined to provide maximum benefits and economy. Carefully follow the operation charts to choose the proper size generator for the cubic foot area. Keep the recharge times to a minimum for best results. Do not undersize the generator or optimum results may never be achieved. Operates on 110 VAC.

Carbon dioxide generators operate by burning carbonaceous fuels such as propane or natural gas. The burners used in Green Air Products CO2 generators are specially designed to maximize the production of CO2 and minimize heat as a by-product. Green Air Products generators provide CO2 far more economically than any other means of enrichment. Carbon dioxide enrichment equipment and methods have improved as experience and the understanding of atmospheric control and plant physiology have advanced. Plant metabolism and growth rate are dependent on the available atmospheric CO2. Plants are keenly sensitive to CO2 variations; optimum values must be constant and precisely controlled. The method, timing, and size of equipment must be properly determined to provide maximum benefits and economy. Carefully follow the operation charts to choose the proper size generator for the cubic foot area. Keep the recharge times to a minimum for best results. Do not undersize the generator or optimum results may never be achieved. Operates on 110 VAC.

Carbon dioxide generators operate by burning carbonaceous fuels such as propane or natural gas. The burners used in Green Air Products CO2 generators are specially designed to maximize the production of CO2 and minimize heat as a by-product. Green Air Products generators provide CO2 far more economically than any other means of enrichment. Carbon dioxide enrichment equipment and methods have improved as experience and the understanding of atmospheric control and plant physiology have advanced. Plant metabolism and growth rate are dependent on the available atmospheric CO2. Plants are keenly sensitive to CO2 variations; optimum values must be constant and precisely controlled. The method, timing, and size of equipment must be properly determined to provide maximum benefits and economy. Carefully follow the operation charts to choose the proper size generator for the cubic foot area. Keep the recharge times to a minimum for best results. Do not undersize the generator or optimum results may never be achieved. Operates on 110 VAC.

The CDMC-6 system is designed to sample the air and learn the characteristics of your space, then make adjustments as necessary to ensure a constant level of CO2. The CDM-6000 works in conjunction with the CDDS-2 controller (sequencer) to effectively enrich indoor gardens and greenhouses with CO2 or reconfigured the system mode to vent excess CO2 if desired.

FEATURES

• Built-in Photo Sensor for enhanced control
• Easy to program and operate with adjustable hysteresis (differential)
• Programmed for overshoot protection logic
• Durable infrared sensor
• CO2 measurement range from 0-5000 PPM
• CO2 control range from 300-5000 PPM
• Easy to read LED display light will not affect plant growth
• Mode indicator LEDs
• Factory calibrated and inspected for precision performance
• Operates on 120 VAC at 60 Hz, 12 Amp switching capacity
• Manufactured in Oregon, USA

The CLIPPER: for GH Rainforest, EZ Cloner, DWC, Raft, and similar systems

Sure To Grow products are designed to benefit growers and users by using a unique substrate and a technology designed for the 21st century. Sure To Grow is lighter, cleaner, and much less bulky than any other medium currently on the market. You will find that with Sure To Grow, less is truly more.

A revolutionary way to grow your crops in net pots and buckets! The new STG inserts are easy to use, and with no need to condition or pre-clean, they are ready to use right out of the box. Sized to fit most net pots and buckets, and are compatible with all major growing systems and methods such as: Flood and Drain, Aeroponics, Top drip, DWC, Raft and Fogponics.

Recommended for long-term crops such as tomatoes and cucumbers or plants with a large root mass.

• Available in 10 sizes ranging from a 2" cloner to a 2 gallon bucket
• Superior in performance to preexisting media alternatives

Learn more about STG by watching their instructional videos at http://www.suretogrow.com/video/

The CLIPPER BioD*: for EZ Cloner, Power Cloner, Clone Machine, and traditional soil applications

*Manufactured from Tencel, a biodegradable fiber

Sure To Grow products are designed to benefit growers and users by using a unique substrate and a technology designed for the 21st century. Sure To Grow is lighter, cleaner, and much less bulky than any other medium currently on the market. You will find that with Sure To Grow, less is truly more.

A revolutionary way to grow your crops in net pots and buckets! The new STG inserts are easy to use, and with no need to condition or pre-clean, they are ready to use right out of the box. Sized to fit most net pots and buckets, and are compatible with all major growing systems and methods such as: Flood and Drain, Aeroponics, Top drip, DWC, Raft and Fogponics.

Recommended for long-term crops such as tomatoes and cucumbers or plants with a large root mass.

• Available in 10 sizes ranging from a 2" cloner to a 2 gallon bucket
• Superior in performance to preexisting media alternatives

Learn more about STG by watching their instructional videos at http://www.suretogrow.com/video/

CO2 Set Point Controller

• Set and Forget; easy to install and operate

• Factory calibrated and inspected for precision performance

• Preset hysteresis (differential) of 20 PPM

• Photo Sensor to defeat CO2 enrichment at night (dark)

• Large LED display w/real-time CO2 PPM

• Orange LED to indicate when CO2 enrichment is active

• Elevation adjustment for improved accuracy

• Fully integrable with other atmospheric controllers or timers

• Durable black anodized aluminum chassis resists rusting, corrosion and scratching

• Red illuminated power switch

• 14 AWG, SJTW rated piggy back power cord

• Operates on 120 VAC at 60 Hz, 12 Amp switching capacity

The CT-DH-1 is designed to turn "On" exhaust and/or intake fans to remove excess or unwanted heat and humidity. Set your desired temperature and humidity using the dials. Internal sensors will allow a 7F temperature comfort zone (3F with an external coil or remote bulb) and a 5% humidity span (differential) between the time the fans activate for cooling or dehumidifying and then turn "Off" again. Plug-in and control circulation fans, exhaust fans, cooling systems, or dehumidifiers. The outlets on the CT-DH-1 are integrated, so that when either the temperature or humidity settings are exceeded, all four will activate, turning "On" equipment plugged into any of the four outlets.

The CT-DH-1 operates on 120 Volt AC with 15 Amp maximum switching capacity and is intended for indoor use only. Be sure to locate your atmospheric controller where it will accurately sample and respond to the average air conditions. Good air circulation around the controller and in your garden space is essential. Avoid locating the controller in a draft or in direct sunlight.

The CT-DH-2 is also designed to turn "On" cooling and dehumidifying equipment to remove excess heat and humidity. However, the CT-DH-2 offers you independent outlets for heating or cooling. The left outlets activate when temperature exceeds your set point. The right outlets activate when humidity exceed your set point. Set your desired temperature and humidity using the dials. Internal sensors will allow a 7F temperature comfort zone (3F with an external coil or remote bulb) and a 5% humidity span (differential) between the time the fans activate for cooling or dehumidifying and then turn "Off" again.

The CT-DH-2 operates on 120 Volt AC with 15 Amp maximum switching capacity and is intended for indoor use only. Be sure to locate your atmospheric controller where it will accurately sample and respond to the average air conditions. Good air circulation around the controller and in your garden space is essential. Avoid locating the controller in a draft or in direct sunlight.

While the CT-DH-3 has many applications, it was primarily developed for use with CO2 equipment and exhaust/ventilation fans. The left side (or equipment) outlets of the controller are normally "ON" until defeated when the right side outlets are activated. Internal sensors will allow for 7F temperature zone and a 5% humidity differential between the time that the fans come "ON" and then turn "OFF" again. When temperature or humidity rises above your dial set points, the right outlets will activate and the left outlets will deactivate. The right side outlets will remain "ON" until the temperature drops 7 and/or the humidity drops 5% below your set points. At which time, the right outlets will shut "OFF" and reactivate the left outlets.

The CT-DH-3 operates on 120 Volt AC with 15 Amp maximum switching capacity and is intended for indoor use only. Be sure to locate your atmospheric controller where it will accurately sample and respond to the average air conditions. Good air circulation around the controller and in your garden space is essential. Avoid locating the controller in a draft or in direct sunlight.

The CT-DH-4 and 4P are designed to be used with CO2 equipment, dehumidifiers, and exhaust fans. While it is similar to the CT-DH-3 it has the added feature of independent outlets for temperature and humidity control. It is ideally suited for use with dehumidifiers. Temperature above your set point will activate the right hand outlets and deactivate the bottom left "CO2" outlet. Humidity will activate the top left "Dehumidify" outlet. Internal sensors will allow a 7 temperature comfort zone and a 5% humidity (differential) between the time the equipment comes "On" and goes back "Off" again. Set the temperature and humidity to the desired settings. The CO2 outlet is normally in the "On" position and is able to activate CO2 equipment as needed. An optional photosensor will defeat CO2 enrichment during darkness hours. Intended for indoor use only. The CT-DH-4 operates on 120 Volts AC with 15 Amp max switching capacity.

The CT-DH-3P is installed for cooling and dehumidifying control (operates on 120 Volt AC with 15 Amp maximum switching capacity and is intended for indoor use only. This unit may be used independently or with many other Green Air Products controls to create an integrated system. When the temperature or humidity raise above the predetermined setting, the CT-DH-3P initiates a venting cycle and CO2 generation is momentarily halted. The Cyclestat is used to time the frequency and duration of the CO2 production. In the event of an exhaust cycle the Cyclestat will reset and immediately replenish CO2 enrichment upon completion of the exhaust function. The CT-DH-3P has a built in photo sensor that prevents CO2 operation during darkness periods. The CO2 generator or emitter system are plugged into the Cyclestat and the Cyclestat is plugged into the left outlets of the CT-DH-3P. The fan is plugged into the right side.