Ideal for medium soil (loam). For landscape and container plants. Maintains a constant flow rate even on hillsides or long circuits.

Use to drip at the rate of 1 GPH

Turbulent flow design virtually eliminates clogging.

1/2 - 5/8" Tubing Support Clamps - for use with 1/2" hose. Afix to wood or stucco.

Use with 1/2" poly hose only.

Use to join two pieces of 1/2" hose.

Use to close off ends of 1/2" tubing. Slip over hose end using a pushing and twisting motion.

Use to close off ends of 1/2" - 5/8" hose. Slip over hose end about 6", fold back hose tightly, and slide clamp over the folded end.

1/4" Double Barbed Tee

Use to attach 1/4" hose to wood and stucco.

For use with 1/4" Poly of vinyl tube only.

Ideal for light soil (sandy). For landscape and container plants. Maintains a constant flow rate even on hillsides or long circuits.

Ideal for light soil (sandy). For landscape and container plants. Maintains a constant flow rate even on hillsides or long circuits.

Use with 1/2" Poly Hose Only

Use to connect 1/2" hose to a 3/4" male pipe thread.

3/4" pipe thead swivel to 1/2" Compression

Filters out sand, rust, and soil particles.

Easy to use with all drip watering & sprinkler systems

High capacity - up to 720 GPH (12 GPM)

Recommended for well water

Long lasting 150 mesh screen element with O-rings to prevent leakage.

Maximum operating pressure: 150 PSI

4" Support Stakes for 1/4" tubing. Use to hold tubing with drippers in position next to the plants to be watered.

Converts 1/2" sprinkler riser to six adjustable pressure compensating outlets. Each outlet is adjustable from 0-20 GPH, maintaining a constant flow rate with pressures ranging from 15-40 PSI.

Heavy duty plastic stakes used to hold 1/4" tubing in place

Single-station analog water timer. Large control knobs for easy set up. Program any combination of frequency at 1, 2, 3, 4, 6, 8, 12, 24, 48, 72 or 168 hour(s) and run times of 1, 3, 5, 10, 15, 20, 30, 60 or 120 minute(s). Manual On/Off feature and built-in LED indicator when batteries are low.

Inlet: 3/4" female hose thread swivel

Outlet: 3/4" male hose thread

Color: Green/Black

Contents: Uses two AAA batteries (not included)

The Bluelab Calibration Solutions are a very necessary part of a growers toolbox. These solutions are manufactured specific to the calibration process and referenced to high laboratory standards by Bluelab. They are required for the calibration of pH meters, pH monitors and controllers. Regular cleaning and calibrating of pH measuring equipment ensures accurate readings. Bluelab's EC/CF equipment does not need calibrating, as they are all factory calibrated at Bluelab. The CF27.7 solution is used as a reference to ensure you have adequately cleaned the EC/CF probe.

The Bluelab Calibration Solutions are a very necessary part of a growers toolbox. These solutions are manufactured specific to the calibration process and referenced to high laboratory standards by Bluelab. They are required for the calibration of pH meters, pH monitors and controllers. Regular cleaning and calibrating of pH measuring equipment ensures accurate readings. Bluelab's EC/CF equipment does not need calibrating, as they are all factory calibrated at Bluelab. The CF27.7 solution is used as a reference to ensure you have adequately cleaned the EC/CF probe.

The Bluelab Calibration Solutions are a very necessary part of a growers toolbox. These solutions are manufactured specific to the calibration process and referenced to high laboratory standards by Bluelab. They are required for the calibration of pH meters, pH monitors and controllers. Regular cleaning and calibrating of pH measuring equipment ensures accurate readings. Bluelab's EC/CF equipment does not need calibrating, as they are all factory calibrated at Bluelab. The CF27.7 solution is used as a reference to ensure you have adequately cleaned the EC/CF probe.

Seasonal changes, sunlight hours, wind, inherent plant growth; from vegetative to fruiting; are all influencing factors to plant growth success. But more importantly, these parameters change the plants uptake and need of water and specific nutrient elements. The Bluelab Guardian is a constant indicator of the desired levels of EC, pH and temperature, enabling the grower to optimize these parameters as the crop progresses through each growing phase.

The Bluelab Guardian removes the complexity of how each parameter relies on each other for outstanding growth. Our innovative monitor is a new method to help guard the success of your crops with immediate and accurate results. A flashing display lets you know if one parameter moves away from the ideal, allowing you to make the required adjustments quickly and effectively.

Features:

• Adjustable brightness display
• Large easy to read displays
• ‘Plant Safe' green LED display
• Selectable values for conductivity and temperature
• Simple push button pH calibration
• No calibration required for conductivity and temperature
• Silent alarm for both high and low settings
• Settings retained when power lost (non-volatile memory)
• Temperature compensated
• International power supply
• Water resistant design
• 2 year guarantee (6 months for pH probe)

Bluelab Guardian Power Supply with international plug adpators; North America, Australia/New Zealand, UK, Euro

Portable, easy-to-use pH meter that accurately measures pH anytime, anywhere to help you maintain optimum levels and improve plant development.

Main Features

• Quality pH probe included
• Calibration solutions included
• Simple push button pH calibration
• Auto turn off function
• Large 13mm (1/2in) digital display for easy reading
• Low battery indicator
• 2 x AAA batteries
• Light weight and portable

The Probe on Bluelab meter, monitor, Truncheon or controller must be kept clean. If the probe is contaminated or dirty, it affects the accuracy. The probe surface is where the instrument takes the reading of the solution and the information is sent back from the probe to the electronic brain of the instrument. Cleaning is a very easy task and it prolongs the life of the truncheon.

The Bluelab Calibration Solutions are a very necessary part of a growers toolbox. These solutions are manufactured specific to the calibration process and referenced to high laboratory standards by Bluelab. They are required for the calibration of pH meters, pH monitors and controllers. Regular cleaning and calibrating of pH measuring equipment ensures accurate readings. Bluelab's EC/CF equipment does not need calibrating, as they are all factory calibrated at Bluelab. The CF27.7 solution is used as a reference to ensure you have adequately cleaned the EC/CF probe.