The REFLECTOR HEAT SHIELD^TM is a sturdy, custom-fitted cover that double insulates your existing air-cooled hood against the heat your lights generate. With the REFLECTOR HEAT SHIELD^TM, the heat is contained within your hood to be carried away more efficiently by your existing air-cooling system. This results in a cooler environment, happier plants and higher energy savings!

• 95% reflective exterior

• Saves money and energy by reducing grow room temperature & maximizing cooling system efficiency

• Heavy duty insulating material reduces air flow noise

• Custom fit to your reflectors

• Soft, durable and machine washable

• Strong, high quality construction

• Made in the USA

Sturdy covering that double insulates your ducting against heat. Less heat escapes and is instead contained within your ducting to be more efficiently carried away by your existing air-cooling system. This results in a cooler environment, happier plants and energy savings from increased A/C efficiency. This cover is for 6" ducting and is 10' long.

- 95% REFLECTIVE EXTERIOR
- SAVES MONEY AND ENERGY
- HEAVY DUTY INSULATING MATERIAL
- REDUCES YOUR GROW ROOM TEMPERATURE
- MAXIMIZES COOLING SYSTEM EFFICIENCY
- REDUCES AIR FLOW NOISE
- SOFT, DURABLE AND MACHINE WASHABLE
- STRONG, HIGH QUALITY CONSTRUCTION
- MADE IN THE USA

Sturdy covering that double insulates your ducting against heat. Less heat escapes and is instead contained within your ducting to be more efficiently carried away by your existing air-cooling system. This results in a cooler environment, happier plants and energy savings from increased A/C efficiency. This cover is for 6" ducting and is 10' long.

- 95% REFLECTIVE EXTERIOR
- SAVES MONEY AND ENERGY
- HEAVY DUTY INSULATING MATERIAL
- REDUCES YOUR GROW ROOM TEMPERATURE
- MAXIMIZES COOLING SYSTEM EFFICIENCY
- REDUCES AIR FLOW NOISE
- SOFT, DURABLE AND MACHINE WASHABLE
- STRONG, HIGH QUALITY CONSTRUCTION
- MADE IN THE USA

The REFLECTOR HEAT SHIELD is a sturdy, custom-fitted cover that double insulates your existing air-cooled hood against the heat your lights generate. With the REFLECTOR HEAT SHIELD, less heat escapes into your room and is instead contained within your hood to be better carried away by your existing air-cooling. This results in a cooler environment, happier plants and energy savings from increased A/C efficiency.

- 95% REFLECTIVE EXTERIOR
- SAVES MONEY AND ENERGY
- HEAVY DUTY INSULATING MATERIAL
CUSTOM FIT TO YOUR REFLECTORS
- REDUCES YOUR GROW ROOM TEMPERATURE
- MAXIMIZES COOLING SYSTEM EFFICIENCY
- REDUCES AIR FLOW NOISE
- SOFT, DURABLE AND MACHINE WASHABLE
- STRONG, HIGH QUALITY CONSTRUCTION
- MADE IN THE USA

The Ice Box is a safe and effective way to water-cool the air leaving your reflectors without adding a/c or more fans. . It uses an air-to-water heat exchanger to water cool the hot air your reflectors produce. Water-cooling is much more effective and efficient than air-cooling, and here's some science to prove it: Water has a thermal conductivity of 0.6 W/ (m*K) which is much higher than the thermal conductivity of air which is only 0.03 W/(m*K). Water also has a much higher specific heat capacity than air. What that means is water can absorb and remove from your garden 4 times the heat nearly 20 times faster than air! We aren't just talking about air cooling your reflectors, this goes for your air conditioning system too. Once heat is released in to your room the ability to efficiently remove that heat is lost. Air is only cooled with electricity whereas water can be cooled in dozens of ways with little or no energy. Furthermore, only 30% of the energy used in air conditioning is converted into usable cooling power, the rest is wasted. It doesn't take a rocket scientist to figure out that water-cooling will reduce your electric bill ... making your grow room a much happier place for you and your plants. In addition to cooling the heat from all those miniature suns we have in our grow rooms, if the water running through the Ice Box is cold enough, it can actually add supplemental air conditioning to your room, making them great for every operation from hut to warehouse.

Features:

• Engineered for maximum efficiency
• Allows you to keep a sealed room which keeps your CO2 in and pests and pathogens out
• Water approximately 10 degrees cooler than the room temp will eliminate the bulb heat from a 1000 watt lamp
• Water approximately 20 degrees cooler than the room temp will reduce or even eliminate the need for a/c
• Can be connected directly to the reflector or can be wall mounted with optional wall mount kit

Recommendations / Equipment Needed:

• For proper function the Ice Box must be installed on the exiting air duct flange, not the incoming air!
• Air-cooled reflector and inline fan with approximately 250 CFM for maximum efficiency
• Reflectors can be daisy chained using one fan as long as each reflector gets a minimum airflow of 250 CFM
• Pump sized at 300-500 GPH with 8-10 feet of lift/head pressure
• Chiller size per 1000 watts: 1/4HP Minimum, 1/3HP Optimal
• With properly sized chiller, reservoir size of 25 gallons is sufficient for almost any set up
• For optimal performance use one IceBox per reflector
• Designed to use with 1/2" tubing

The Ice Box is a safe and effective way to water-cool the air moving through your reflectors, without adding a/c or additional fans.

Can be mounted directly onto the reflector or wall mounted with optional wall mount kit
Allows you to keep a sealed room which keeps your CO2 in and pests and pathogens out

HydroGen Co2 Monitor

Very affordable, and simply all you need to regulate CO2. This CO2 controller can accurately monitor room CO2 levels and turn CO2 regulators or generators on and off. The monitor is preprogrammed to turn devices on at 1300 ppm and off at 1500 ppm with overshoot already calculated. Instead of a costly digital readout, the HydroGEN CO2 monitor uses indicator lights to show approximate CO2 levels. Hydro Innovations uses a high quality, self calibrated, maintenance free SenseAir brand Infrared CO2 detector. The monitor has a standard 120 volt piggyback plug and includes an EZ mount wall bracket.

Finally, a safe, very efficient way to water-cool your entire grow room! It consists of a high-quality heat-exchanger with molded plastic housing that is designed to install over a 6" or 8" air-cooled reflector duct flange. Air from your indoor garden is either pushed or pulled through the reflectors with an inline fan and then passed over the Ice Box heat exchanger. Cold water is circulated through the heat exchanger, cooling the air before it exits right back into the indoor garden area. The longer the tubing the higher the pump. But don’t use too high of a pump, due to the fact that it may not allow adequate time for the water to chill. If humidity is an issue in your room, you may want to put the reservoir outside the room.

• ¼ HP minimum chiller size is recommended per 1000 watts.
• 600-900 gph pump needed depending on the length and size of the tubing.
• Approximately 250 cfm of airflow is needed to properly cool the fixture.
• Several units can be daisy chained together using one fan, only 250 cfm is needed though all fixtures.
• For maximum efficiency we recommend one Ice Box per reflector.
• Allows you to keep a sealed room and helps keep pest and pathogens out of the room.
• The CO2 stays in the room instead of exhausting out.
• By running the water approximately 20 degrees colder than your environment it can reduce the cooling load or replace your a/c unit.

Finally, a safe, very efficient way to water-cool your entire grow room! It consists of a high-quality heat-exchanger with molded plastic housing that is designed to install over a 6" or 8" air-cooled reflector duct flange. Air from your indoor garden is either pushed or pulled through the reflectors with an inline fan and then passed over the Ice Box heat exchanger. Cold water is circulated through the heat exchanger, cooling the air before it exits right back into the indoor garden area. The longer the tubing the higher the pump. But don’t use too high of a pump, due to the fact that it may not allow adequate time for the water to chill. If humidity is an issue in your room, you may want to put the reservoir outside the room.

• ¼ HP minimum chiller size is recommended per 1000 watts.
• 600-900 gph pump needed depending on the length and size of the tubing.
• Approximately 250 cfm of airflow is needed to properly cool the fixture.
• Several units can be daisy chained together using one fan, only 250 cfm is needed though all fixtures.
• For maximum efficiency we recommend one Ice Box per reflector.
• Allows you to keep a sealed room and helps keep pest and pathogens out of the room.
• The CO2 stays in the room instead of exhausting out.
• By running the water approximately 20 degrees colder than your environment it can reduce the cooling load or replace your a/c unit.

Wall mount kit for the 8" Ice Box heat exchanger.

HydroGen LP- NG Conversion Kit

The HydroGEN is the world's first and only water cooled CO2 generator. Water cooling is capable of removing 86% of the heat produced by burning propane and has loads of other options and features not available in any other CO2 generator on the market, including a completely adjustable flame (can produce anywhere between 15 and 45 cubic feet of CO2 per hr), an adjustable water flow valve, no pilot light (flame is activated by water flow), a tipover cut off, an overheat shut down sensor, and the list goes on. The unit can easily be used in a closed-loop system with a small chiller and reservoir, or you can connect directly to your home water supply and drain to storage for reuse in your garden. The unit is compact in size and can be either hung or wall-mounted anywhere in your garden.

This optional valve (used in place of a pump) is designed to be installed in a pressurized water line and to be controlled by your co2 monitor. This is a high quality solid brass valve designed for years of service. The valve has 3/4” NPT outlets that can be used to attach the valve inline with your existing plumbing or you can use the supplied ½” hose barbs to make the connection. You will need either a pump or a valve but not both.