image description

Items 1 to 30 of 655 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction
  • Sunleaves Extension Cord 120V, 25'

    The 14-gauge, 120-volt Sunleaves Extension Cord features three impact-resistant outlets and a grounded plug. The maximum load of this 25-foot cord is 1,800 watts and 15 amps. For indoor use only.
    SKU:
    SEC125

    Retail: $20.00

    Special Price $17.00

  • Agrowtek EC Probe

    High quality lab-grade replacement probes for Agrowtek's hydroponics sensor kit. pH sensor probe is a waterproof 3 ft cable with BNC connection. 0-14 pH measurement range. Electrical conductivity (EC) sensor probe is a waterproof 3 ft cable with tinned leads for terminal block connection. 0-5000 microSiemens measurement range. Temperature sensor probe is a waterproof 3 ft cable with tinned leads for terminal block connection. -40 – 145°F sensing range, stainless steel probe sheath.
    SKU:
    703126

    Retail: $149.00

    Special Price $119.20

  • Agrowtek Temperature Probe

    High quality lab-grade replacement probes for Agrowtek's hydroponics sensor kit. pH sensor probe is a waterproof 3 ft cable with BNC connection. 0-14 pH measurement range. Electrical conductivity (EC) sensor probe is a waterproof 3 ft cable with tinned leads for terminal block connection. 0-5000 microSiemens measurement range. Temperature sensor probe is a waterproof 3 ft cable with tinned leads for terminal block connection. -40 – 145°F sensing range, stainless steel probe sheath.
    SKU:
    703128

    Retail: $59.00

    Special Price $47.20

  • Agrowtek CX4 Quad Outlet Contactor 15A/120V (SPECIAL ORDER ITEM - 2-4 WEEKS LEAD TIME)

    Four relay-controlled outlets for banked equipment control with GrowControl™ series controllers. All four receptacles are operated simultaneously. Recommended for fans and small lighting loads. Rated at 120 Volt ac/15 Amps.
    SKU:
    703134

    Retail: $199.00

    Special Price $159.20

  • Agrowtek Serial RS-232 (DB9) to USB Converter (FDTI)

    USB to Serial adapter cable connects GrowControl™ controller's serial port to USB. Connect free GrowControl software to the controller’s serial port, modify Ethernet IP address settings and perform firmware updates with the serial port.
    SKU:
    703148

    Retail: $38.00

    Special Price $30.40

  • Agrowtek Aspirated Indoor Climate Sensor (Temp/RH/Light) w/ CO2 Upgrade Installed

    GrowControl™ GC-Pro and GC-Plus precision aspirated climate sensor. Senses air temperature, relative humidity, light irradiance and CO2. Add a climate sensor to your GC-Pro to control two independent climate zones from one control system! Noise-proof sensor can be mounted up to 2000 feet away from the controller!
    SKU:
    703162

    Retail: $648.00

    Special Price $518.40

  • Agrowtek pH Probe

    High quality lab-grade replacement probes for Agrowtek's hydroponics sensor kit. pH sensor probe is a waterproof 3 ft cable with BNC connection. 0-14 pH measurement range. Electrical conductivity (EC) sensor probe is a waterproof 3 ft cable with tinned leads for terminal block connection. 0-5000 microSiemens measurement range. Temperature sensor probe is a waterproof 3 ft cable with tinned leads for terminal block connection. -40 – 145°F sensing range, stainless steel probe sheath.
    SKU:
    703124

    Retail: $119.00

    Special Price $95.20

  • Agrowtek 8 Output Expansion

    XD Eight-output expansion module for Agrowtek's GC-Pro and GC-ProXL series controllers. Add eight more outputs to GrowControl™ controllers by installing an XD module. GC-Pro controllers accept up to one XD module; GC-ProXL controllers accept up to three XD modules.
    SKU:
    703108

    Retail: $199.00

    Special Price $159.20

  • Sunleaves Extension Cord with Inline Outlets 120V, 25'

    The heavy-duty Sunleaves Extension Cord with Inline Outlets features three outlets (two in-line) with weather-guard protection. This 14-gauge, 120-volt extension cord has a maximum load of 1,800 watts and 15 amps, and is 25 feet long with 8 feet between outlets.
    SKU:
    SECI125

    Retail: $30.00

    Special Price $25.50

  • Titan Controls Atlas 1 Remote Sensor Replacement

    Atlas® 1 CO2 Monitor/Controller comes with a 25 foot remote sensor. It features adjustable set point and elevation levels, a built in 'self calibration' function and an integrated photocell that enables operation in daytime hours only, when the plants need CO2. Simple to use and easy to operate. 15 Amps/120 Volt/60 Hz. Replacement sensor can be purchased separately. The sensor comes factory calibrated for precise CO2 readings and utilizes low voltage technology to avoid Radio Frequency Interference (RFI) from electronic ballasts.
    SKU:
    702617

    Retail: $384.95

    Special Price $307.96

  • Titan Controls Saturn 6 Replacement Sensor

    The Saturn® 6 gives you the control of your temperature (day & night), humidity and CO2 PPM levels with digital accuracy. It comes with a 15 ft remote sensor which also features a photocell. The photocell ensures daytime only CO2 enrichment and the ability to control a night only device. The LCD display and push buttons allow you to easily change the settings. It has min/max data logging capabilities. Enclosure protects internal components from dust, rust and moisture. 15 Amps maximum/120 Volts/60 Hz.
    SKU:
    702875

    Retail: $308.95

    Special Price $247.16

  • Titan Controls Atlas 8 Replacement Sensor

    The Atlas® 8 is a digital CO2 monitor/controller. Once the CO2 level has reached your desired set point it will disable the CO2 device. It features a photocell to ensure daytime only dosing of CO2 via a generator or regulator. This controller comes with a 15 ft remote sensor that houses the photocell and CO2 sniffer. Besides having traditional injection capabilities, it also features fuzzy logic programming. Fuzzy logic applies constant calculations to the output controlling your CO2 regulator to ensure that you do not undershoot or over shoot your predetermined set point. The CO2 min/max can also be viewed on the LCD. Enclosure resists dust, rust and moisture. 15 Amps maximum/120 Volts/60 Hz.
    SKU:
    702877

    Retail: $265.95

    Special Price $212.76

  • Titan Controls - Spartan Series Repeat Cycle Timer

    The Spartan Series® Repeat Cycle Timer is an easy to use and reliable product. It features a 5 second to 30 minute ON time, a 5 second to 60 minute OFF time and adjustable modes for day, night or 24 hours. Designed to precisely control pumps, CO2 systems and fans. The Repeat Cycle Timer features a durable enclosure. 15 Amps maximum/120 Volts/60 Hz.
    SKU:
    702894

    Retail: $44.95

    Special Price $35.96

  • Powerbox DPC-24000-BT

    The Powerbox® DPC-24000-BT is our largest and most advanced model so far. This unit has everything you need to run up to 24 1,000 Watt lights, plus accessories at 120V. Best of all, this unit contains our exclusive new 6-channel timer, which allows you to control outlets in six separate zones, making this the most versatile lighting controller available on the market. Main circuit protection is provided by a 150A circuit breaker. Additional protection is provided by mini circuit breakers that protect each set of outlets. The DPC-24000 also has an iPhone App! By downloading the FREE app from the AppStore, you can control the DPC-24000 from your iPhone via BlueTooth Smart wireless technology.
    SKU:
    702972

    Retail: $2,498.00

    Special Price $1,998.40

  • Agrowtek Grow Control GC-Pro Quad-Zone Climate Controller (Includes basic climate sensor & ethernet port)

    Agrowtek's GC-Pro controls up to four climate zones. Complete control of temperature, humidity, lighting, CO2 (sensor optional), timers, irrigation and more! Includes two sensor ports, four discrete inputs, twelve outputs for relays and one basic climate sensor. Serial & Ethernet ports for free remote monitoring software. Up to four (4) climate zones with basic climate, lighting and timer controls (no dosing controls).
    SKU:
    703102

    Retail: $2,028.00

    Special Price $1,622.40

  • Titan Controls Apollo 16 Medium LCD Display Digital Cycle Timer

    The Apollo® 16 is a versatile digital timer that’s simple to operate. It only takes four buttons to control the functions of the timer and features a large easy to read LCD display. A variety of schedules can be programmed in minutes and hours using 16 different ON and OFF schedules. Internal battery backup feature saves settings in case of a power failure. The Apollo® 16 may be used to control CO2, fan, pump, light mover, etc. Enclosure resists dust, rust and moisture. 15 Amps maximum/120 Volts/60 Hz. Not for use with electronic/digital ballasts.
    SKU:
    734116

    Retail: $18.95

    Special Price $15.16

  • Intermatic Timer Mechanical, 20A/240V

    The 20-amp, 240-volt, heavy-duty Intermatic Mechanical Timer is suitable for general purpose applications including lighting systems. It possesses a grounded 240V plug and receptacle and a 5000-watt maximum capacity. Four trippers are included (two on, two off) to control cycles of up to 24 hours, as well as a manual override on/off switch.
    SKU:
    ITM140

    Retail: $29.00

    Special Price $24.65

  • Titan Controls Zephyr 5 - Digital Cooling Thermostat Controller

    Easy to use - plug fan into receptacle, then plug controller into 120 volt power supply. Features an easy to read digital display. The 6 ft remote temperature probe allows for accurate temperature readings to be taken. Wide cooling range from 40° to 108° F. Set thermostat to the temperature you want the fan to come on at and that's it! 10 Amps maximum/120 Volts/60Hz.
    SKU:
    702830

    Retail: $34.95

    Special Price $27.96

  • Titan Controls Spartan Series Complete Digital Environmental Controller (Temperature, CO2 and Humidity)

    This controller will allow you to precisely monitor and control the environment in your grow room. Featuring an easy to use analog interface, this digital controller is easy to program and use. Each set point (temperature, humidity and CO2) are programmed using a set of dedicated knobs. Readings are displayed on easy to read digital displays. The sensor which measures the temperature, humidity, light and CO2 levels in your room attaches to the controller with a 15 ft cord. Enclosure resists dust, rust and moisture. 14.5 Amps maximum/120 Volts/60Hz.
    SKU:
    702450

    Retail: $549.95

    Special Price $439.96

  • Titan Controls Spartan Series Basic Digital Environmental Controller (Temperature, CO2 Timer and Humidity)

    Easily control the temperature and humidity in your room with the Spartan Series Basic Digital Environmental Controller. Capable of controlling your heating, cooling, timing and humidity needs, the controller features a user friendly analog interface with large easy to read displays. The sensor includes a photocell which allows you to have day and night settings. The timing outlet can be used to activate a trigger based lighting controller or used to run a CO2 generator or regulator. Enclosure resists dust, rust and moisture. 14.5 Amps maximum/120 Volts/60Hz.
    SKU:
    702451

    Retail: $201.95

    Special Price $161.56

  • Titan Controls Spartan Series Basic CO2 Controller with Remote Sensor

    Simple and easy to use, the Spartan Series Basic CO2 Controller gives you everything you need to accurately raise the CO2 levels in your growing environment. A large easy to read display will show you what your ppm levels are and knobs that double as buttons when pushed allow you to quickly and easily program the controller to your liking. This unit also features an override feature which allows it to be used in conjunction with a standalone exhaust controller so that you are not putting valuable CO2 into your room while it is being vented. This product also features fuzzy logic capabilities for use with CO2 regulators. Enclosure resists dust, rust and moisture. 15 Amps maximum/120 Volts/60Hz.
    SKU:
    702464

    Retail: $424.95

    Special Price $339.96

  • Replacement Sensor for Spartan Series Basic CO2 Controller

    Simple and easy to use, the Spartan Series Basic CO2 Controller gives you everything you need to accurately raise the CO2 levels in your growing environment. A large easy to read display will show you what your ppm levels are and knobs that double as buttons when pushed allow you to quickly and easily program the controller to your liking. This unit also features an override feature which allows it to be used in conjunction with a standalone exhaust controller so that you are not putting valuable CO2 into your room while it is being vented. This product also features fuzzy logic capabilities for use with CO2 regulators. Enclosure resists dust, rust and moisture. 15 Amps maximum/120 Volts/60Hz.
    SKU:
    702465

    Retail: $254.95

    Special Price $203.96

  • 15' Extension for Spartan Series Controllers

    Easily control the temperature and humidity in your room with the Spartan Series Basic Digital Environmental Controller. Capable of controlling your heating, cooling, timing and humidity needs, the controller features a user friendly analog interface with large easy to read displays. The sensor includes a photocell which allows you to have day and night settings. The timing outlet can be used to activate a trigger based lighting controller or used to run a CO2 generator or regulator. Enclosure resists dust, rust and moisture. 14.5 Amps maximum/120 Volts/60Hz.
    SKU:
    702469

    Retail: $16.95

    Special Price $13.56

  • Replacement Sensor for Atlas 9 CO2 Controller

    Compact and easy to use, the Atlas® 9 is a growers dream. The 15 ft remote sensor allows you to measure the CO2 levels of your garden exactly where you need to measure them. Fuzzy logic capabilities allow you to accurate dose CO2 when using a CO2 regulator. The knob that doubles as a button when pushed lets you easily program this product. Enclosure resists dust, rust and moisture. 10 Amps maximum/120 Volts/60Hz.
    SKU:
    702466

    Retail: $211.95

    Special Price $169.56

  • Titan Controls Hades 2 Replacement Sensor

    The Hades® 2 controls up to two light banks up to 600 watts each via your lighting controller trigger cords, has a high temperature shut-off function to turn off your grow lights and also a hot start protection function to allow your lights to cool before re-striking. The recycle timer can be set to run in day only, night only or 24 hour mode. This controller has a 3 ft remote sensor to monitor temperature levels. Enclosure resists dust, rust and moisture. 15 Amps maximum/120 Volts/60 Hz. Patent Pending 29525627.
    SKU:
    702876

    Retail: $49.95

    Special Price $39.96

  • Titan Controls Saturn 5 Replacement Sensor

    The Saturn® 5 is a digitally based environmental controller featuring a short cycle timer for CO2 enrichment. It uses a 15 ft remote sensor to operate your temperature, humidity, CO2 system and night time gear. This controller gives you the ability to set day and night temperature levels. It has a LCD display and color coded push buttons for easy programming. This device also offers min/max data-logging capabilities for temperature and humidity. Enclosure protects internal components from dust, rust and moisture. 15 Amps maximum/120 Volts/60 Hz.
    SKU:
    702874

    Retail: $105.95

    Special Price $84.76

  • Sentinel G.P.S 50 m Cable

    S.I.C.E. (Sentinel Intelligent CO2 Enrichment) communications cables which allow for communication between S.I.C.E. series products including the CPPM-4i, CHHC-4i, ICG-30NG and ICG-30LP. These same cables allow for S.I.C.E. units to be placed up to 50 meters away from other S.I.C.E. units.
    SKU:
    703199

    Retail: $129.95

    Special Price $103.96

  • Agrowtek Water Leak Detector Sensor

    Be alerted to water leaks and shut-down pump equipment in the event of a leak. Simply wire this water leak sensor to one of the GC-Pro's four digital inputs and setup the leak sensor control.
    SKU:
    703176

    Retail: $99.00

    Special Price $79.20

  • Agrowtek Water Flow Switch

    Flow switches connect to your GC-Pro control system to detect the presence of water flow from pumps or drains. Be aware of pump failures as soon as they happen with a simple liquid flow switch. Can be installed inline with flow up to 8 gpm or parallel to flow for larger pumps.
    SKU:
    703178

    Retail: $79.00

    Special Price $63.20

  • Agrowtek Vertical Float Switch (Special Order)

    Float switches connect to the GC-Pro controller and are an economical way monitor and maintain proper reservoir levels. Vertical float sensors mount in the bottom or top of a reservoir. A magnet in the float activates a reed switch inside the sensor body when the float is raised (or lowered if reversed) on the sensor body.
    SKU:
    703180

    Retail: $66.00

    Special Price $52.80